Studying local liquid velocity in liquid–solid packed bed using the newly developed X-ray DIR technique

Combination of X-ray Digital Industrial Radiography (DIR) and Particle Tracking Velocimetry (PTV) techniques for local liquid velocity measurement (V_LL) has been newly developed and successfully applied for trickle bed reactor (TBR). The technique was validated against newly developed fiber optical probe technique. This work attempts to highlight the applicability of this newly developed technique on a liquid–solid packed bed reactor. In this work, liquid was represented by water and solids were represented by EPS beads. The EPS beads were chosen because of its low density property. Three superficial liquid velocities (V_SL) were applied to the system. The experiment was replicated four times. The digital industrial radiography (DIR) consists of a complementary metal oxide semiconductor (CMOS) digital detector and X-ray source. Results of this work suggest that the technique has been successfully applied and comparable with previous work that has been done in the literature. It also suggests that there will be a maximum measurable interstitial liquid velocity when it travel inside the packed bed. The measured V_LL can have a maximum range that is between 4 and 4.7 times that of its V_SL. For V_SL=0.42±±2%, the V_LL-Max is in between 1.7 cm/s and 1.9 cm/s, V_SL=0.84±±2%, the V_LL-Max is in between 3.6 cm/s and 4.0 cm/s, and for V_SL=1.11±±2%, the V_LL-Max is in between 4.3 cm/s and 4.8 cm/s.     

Reduction of Ripple Current Loss by Electromagnetic Coupling of Air‐Core Reactors

To reduce the loss due to ripple current in a multiphase current‐reversible chopper, we investigated electromagnetic coupling of an air‐core reactor. We derived the relationship between the amplitude of the ripple current, the duty factor, and the electromagnetic coupling coefficient, and used the results to estimate the effects of electromagnetic coupling in the design of a train energy storage system. We built reactors with electromagnetic coupling coefficients of 0.93 and 0.60. These reactors employed a new winding structure that provides an optimal electromagnetic coupling coefficient. The mass of the former type of reactor was increased by 4.4% over the conventional design, and that of the latter type of reactor was decreased by 17%. Finally, we tested the new reactors. When the chopper employs the former type of reactor and operates with equal‐phase switching and cumulative coupling, the loss due to ripple current is decreased by 11%. When the chopper employs the latter type of reactor and operates with shift‐phase switching and differential coupling, the loss is decreased to 31%. The test showed that the calculated relationships agreed with the measured values.     

A novel quasi-oppositional harmony search algorithm and fuzzy logic controller for frequency stabilization of an isolated hybrid power system

The intermittent wind power in isolated hybrid distributed generation (IHDG) may cause serious problems associated with frequency (f) and power (P) fluctuation. Energy storage devices such as battery, super capacitor, and superconducting magnetic energy storage (SMES) may be used to reduce these fluctuations associated with f and P. This paper presents a study of IHDG power system for improving both f and P deviation profiles with the help of SMES. The studied IHDG power system is consisted of wind turbine generator and diesel engine generator. Both f and P control problems of the studied power system model are addressed in presence or absence of SMES. Fuzzy logic based proportional–integral–derivative (PID) controller with SMES is used for the purpose of minimization of f and P deviations. The different tunable parameters of the PID controller and those of the SMES are tuned by a novel quasi-oppositional harmony search algorithm. Performance study of the IHDG power system model is carried out under different perturbation conditions. The results demonstrate minimum f and P deviations may be achieved by using the proposed fuzzy logic based PID controller along with SMES.     

Integrated sizing and scheduling of wind/PV/diesel/battery isolated systems

In this paper we address the optimal sizing and scheduling of isolated hybrid systems using an optimization framework. The hybrid system features wind and photovoltaic conversion systems, batteries and diesel backup generators to supply electricity demand. A Mixed-Integer Linear Programming formulation is used to model system behavior over a time horizon of one year, considering hourly changes in both the availability of renewable resources and energy demand. The optimal solution is achieved with respect to the minimization of the levelized cost of energy (LCOE) over a lifetime of 20 years. Results for a case study show that the most economical solution features all four postulated subsystems.     

Copper–4,4′-dipyridyl coordination compound as solid reagent for spectrophotometric determination of reducing sugar employing a multicommutation approach

In this work a multicommuted flow system employing copper–4,4′- dipyridyl coordination compound as the solid-phase reagent for the spectrophotometric determination of reducing sugar was developed. The coordination compound was synthesized through a reaction of the 4,4′-dipyridyl and copper (II) nitrate, under hydrothermal conditions. The complex was characterized by infrared spectroscopy (FTIR), power X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and thermogravimetric analysis (TGA). Based on the characterization, a multicommuted spectrophotometric procedure for the determination of reducing sugar using copper (II) complex as solid reagent is proposed. The proposed method was based on the redox reaction between a monosaccharide, such as fructose and glucose (reducing sugar) and Cu(II). This reaction, mediated in an alkaline medium, produces a yellow compound that can be determined by absorption electronic spectroscopy (λ_ABS = 420 nm). Under optimum experimental conditions, a linear response ranging from 1.0 to 20.0 g L⁻¹ (R = 0.9978 and n = 5), a detection (3σ criterion) and quantification (10σ criterion) limit estimated at 0.23 and 0.75 g L⁻¹, respectively, a standard deviation relative of 4.7% (n = 7), for a reference solution of 10.0 g L⁻¹ reducing sugar, and a sampling rate of 75 determinations per hour were achieved. The proposed system was applied to the determination of reducing sugars in coconut water and juices. The analysis of ten samples and the application of the t-test to the results found, and those obtained using reference procedures (AOAC), provided no significant differences at a 95% confidence level. This system enabled the analysis of reducing sugar with ease and simplicity, providing a significant economy of the solid reagent (600 μg per determination) and reducing effluent generation.     

Interaction of tRNA with Eukaryotic Ribosome

This paper is a review of currently available data concerning interactions of tRNAs with the eukaryotic ribosome at various stages of translation. These data include the results obtained by means of cryo-electron microscopy and X-ray crystallography applied to various model ribosomal complexes, site-directed cross-linking with the use of tRNA derivatives bearing chemically or photochemically reactive groups in the CCA-terminal fragment and chemical probing of 28S rRNA in the region of the peptidyl transferase center. Similarities and differences in the interactions of tRNAs with prokaryotic and eukaryotic ribosomes are discussed with concomitant consideration of the extent of resemblance between molecular mechanisms of translation in eukaryotes and bacteria.     

Investigation of BeO as a reflector for the low power research reactor

Calculations of the fuel burnup, core excess reactivity, and the reactivity worths of the top beryllium shim plates for two reflector types (beryllium and beryllium oxide (BeO)) in the Miniature Neutron Source Reactor (MNSR) have been presented in this paper using the GETERA and MCNP4C codes. The results showed that the reactor infinity multiplication factors were 1.7030 and 1.6824, the core unadjusted excess reactivities were 31.9 and 5.0 mk, and the reactivity worths of the top beryllium shim plates were 22 and 19 mk for the BeO and Be reflectors respectively. Finally, using the beryllium oxide instead of the existing Be reflector in the MNSR reactor increased the core excess reactivity and reactor operation time.     

Application of a micro-channel reactor for process intensification in high purity syngas production via H2O/CO2 co-splitting

A stainless steel micro-channel reactor was tailor-made to an in house-design for process intensification propose. The reactor was used for a two-step thermochemical cycles of H₂O and CO₂ co-splitting reaction, in the presence of La_0.3Sr_0.7Co_0.7Fe_0.3O₃ (LSCF). LSCF was coated inside the reactor using wash-coat technique. Oxygen storage capacity of LSCF was determined at 4465 μmol/g, using H₂-TPR technique. H₂O-TPSR and CO₂-TPSR results suggested that a formation of surface hydroxyl group was the cause of H₂O splitting favorable behavior of LSCF. Optimal operating reduction/oxidation temperature was found at 700 °C, giving 2266 μmol/g of H₂, 705 μmol/g of CO, and 67% of solid conversion, when the H₂O and CO₂ ratio was 1 to 1, and WSHV was 186,000 mL/g.h. Activation energy of H₂O spitting and CO₂ splitting was estimated at 87.33 kJ/mol, and 102.85 kJ/mol The pre-exponential factor of H2O splitting and CO2 splitting was 595.24 s^?1 and 698.79 s^?1, respectively.     

Interactions between hybrid nanosized particles and convection melting inside an enclosure with partially active walls: 2D lattice Boltzmann-based numerical investigation

The ice melting is investigated inside a square cavity with two isothermally partially active walls. The concept of dispersing hybrid alumina–Cu nanoparticles and hybrid silica–multiwalled carbon nanotubes (MWCNTs) nanoparticles is recommended for thermal performance enhancement in this thermal energy storage (TES) system. The two-dimensional explicit lattice Boltzmann convection melting scheme in the single-phase model is applied to account for the natural convection flow induced in the melt region and evolution of the solid–liquid interface. The complete melting time for the pure phase change material (PCM) using case (II) is 33.3% lower compared with other cases. If the price of hybrid Al₂O₃–Cu nanoparticles and heat storage capacity is important, the full melt time diminishes by 16.6% with a volume fraction of 0.01 in case (II). Once hybrid silica–MWCNT nanoparticles with a volume fraction of 0.01 are utilized inside case (II), the lowest charging time is achieved. The complete melting time abates by 23.66% in contrast to the pure PCM melting. The use of single/hybrid nanoparticles to enhance the PCM melting is not necessarily economical as efficient positions of active parts could further lessen the charging time. The efficiency of hybrid nanoparticles is linked to the type and weight proportions of nanoparticles, and positions of thermally active parts.